YAS_P1000_PUMPFAN
Yaskawa P1000 MEMOBUS/Modbus driver — forward-only pump/fan duty with process PI, sleep/wake and the cited control/status word mapping.
When to use it
Use YAS_P1000_PUMPFAN when a Yaskawa P1000 drives a pump or fan over MEMOBUS/Modbus and the PLC is to close the process loop — pressure, flow, level or duct static — with an energy-saving stop when demand collapses.
Interface
The published port signature. This is the whole of what the block exposes to your program — the implementation body is not shown here and ships with the download.
Inputs
| Port | Type | Unit |
|---|---|---|
| RUN | BOOL | — |
| MODE | USINT | — |
| SP | REAL | process units |
| PV | REAL | process units |
| SPD_CMD_PCT | REAL | % |
| SPD_MIN | REAL | % |
| SPD_MAX | REAL | % |
| SLEEP_LVL | REAL | % |
| SLEEP_DLY | TIME | — |
| WAKE_BAND | REAL | % |
| KP | REAL | % per process unit |
| TI_S | REAL | s |
| REV_ACTING | BOOL | — |
| STATUS_WORD | WORD | — |
| FREQ_OUT_WORD | WORD | — |
| COMMS_OK | BOOL | — |
| COMMS_TMO | TIME | — |
| O1_03 | INT | — |
| MAX_FREQ_HZ | REAL | Hz |
| MON_HZ_PER_COUNT | REAL | Hz/count |
| NET_SELECT | BOOL | — |
| REQ_NET_CTRL | BOOL | — |
| MFI_MASK | WORD | — |
| EXT_TRIP | BOOL | — |
| FAULT_RST | BOOL | — |
| RST_QUIESCE_T | TIME | — |
| RST_PULSE_T | TIME | — |
| RST_VERIFY_T | TIME | — |
Outputs
| Port | Type | Unit |
|---|---|---|
| SPEED_PCT | REAL | % |
| SLEEPING | BOOL | — |
| CTRL_WORD | WORD | — |
| FREQ_REF_WORD | WORD | — |
| REF_HZ | REAL | Hz |
| READY | BOOL | — |
| RUNNING | BOOL | — |
| REVERSING | BOOL | — |
| FAULT | BOOL | — |
| RESETTING | BOOL | — |
| SPD_ACT | REAL | Hz |
| MFDO1 | BOOL | — |
| NET_REF_OK | BOOL | — |
| NET_CTRL_OK | BOOL | — |
| TELEGRAM_STALE | BOOL | — |
| ALM_COMMS | BOOL | — |
| ALM_RESET_FAILED | BOOL | — |
| ALM_NOT_IN_NET | BOOL | — |
| ALM_DATA_SETTING | BOOL | — |
| ALM_SCALE_UNKNOWN | BOOL | — |
| ALM_REF_CLAMP | BOOL | — |
| ALM_CFG_ERR | BOOL | — |
| ALM_MON_UNSCALED | BOOL | — |
| ALM_DIR_MISMATCH | BOOL | — |
Supervised control write
YAS_P1000_PUMPFAN commands a real actuator. It is written to sit underneath your own interlock, permissive and protection logic — not to replace it. Commission it as you would any control block you wrote yourself.
Validation evidence
- Tests
- 21
- Simulated scans
- 442
- Simulator
- v0.1.0
Complete IEC 61131-3 implementation with a published test suite that runs on the vplant simulator. The counts above are that suite, executed on this build.
- Conforms to IEC 61131-3
Download YAS_P1000_PUMPFAN — free
Create a free Ri Tech account to download the block. You get the Structured Text body, the Rockwell Add-On Instruction (.L5X), the Schneider Control Expert DFB (.XDB), PLCopen XML and the datasheet.
Every block in the catalogue is free to download, in every format it ships, with no purchase and no card. Browsing needs no account at all; downloading needs a signed-in one, so the block lands in your library and re-downloads whenever you need it.
Source is never published on this page. The implementation is released to a signed-in Ri Tech account — free of charge, but never anonymously.