POWER_QUALITY_MON
Power quality supervision: duration-qualified sag and swell counting, ITIC ride-through violations and IEEE 519 distortion.
When to use it
Use POWER_QUALITY_MON when a power analyser on an incomer or a UPS input reports RMS voltage in per-unit, total harmonic distortion and crest factor, and the site needs sag and swell events counted the way IEEE 1159 defines them rather than every sample that crossed a threshold.
Interface
The published port signature. This is the whole of what the block exposes to your program — the implementation body is not shown here and ships with the download.
Inputs
| Port | Type | Unit |
|---|---|---|
| ENABLE | BOOL | — |
| DATA_OK | BOOL | — |
| RAW_V_PU | REAL | p.u. |
| RAW_THD_V_PCT | REAL | % |
| RAW_CREST | REAL | p.u. |
| SAG_PU | REAL | p.u. |
| SWELL_PU | REAL | p.u. |
| EVENT_MIN | TIME | — |
| THD_LIM_PCT | REAL | % |
| THD_DLY | TIME | — |
| ITIC_D0_PU | REAL | p.u. |
| ITIC_T0 | TIME | — |
| ITIC_D1_PU | REAL | p.u. |
| ITIC_T1 | TIME | — |
| ITIC_D2_PU | REAL | p.u. |
| ITIC_T2 | TIME | — |
| ITIC_U_PU | REAL | p.u. |
| ITIC_TU | TIME | — |
| RESET_CNT | BOOL | — |
| ACK | BOOL | — |
Outputs
| Port | Type | Unit |
|---|---|---|
| THD_V | REAL | % |
| SAG_CNT | UDINT | — |
| SWELL_CNT | UDINT | — |
| CREST | REAL | p.u. |
| V_PU | REAL | p.u. |
| V_MIN_PU | REAL | p.u. |
| EVENT | BOOL | — |
| ITIC_VIOLATION | BOOL | — |
| ALM_THD_HIGH | BOOL | — |
| ALM_DATA_FAULT | BOOL | — |
| ALM_CFG_ERR | BOOL | — |
| VALID | BOOL | — |
IEC 61499 event interface
EI INIT, REQ·EO INITO, CNF
Validation evidence
- Tests
- 12
- Simulated scans
- 763
- Simulator
- v0.1.0
Complete IEC 61131-3 implementation with a published test suite that runs on the vplant simulator. The counts above are that suite, executed on this build.
- Conforms to IEC 61131-3
- Conforms to IEC 61499
Download POWER_QUALITY_MON — free
Create a free Ri Tech account to download the block. You get the Structured Text body, the Rockwell Add-On Instruction (.L5X), the Schneider Control Expert DFB (.XDB), PLCopen XML, the IEC 61499 function block type (.fbt) and the datasheet.
Every block in the catalogue is free to download, in every format, with no purchase and no card. Browsing needs no account at all; downloading needs a signed-in one, so the block lands in your library and re-downloads whenever you need it.
Source is never published on this page. The implementation is released to a signed-in Ri Tech account — free of charge, but never anonymously.