CIP_CONDUCTIVITY_VER
CIP final-rinse acceptance — return conductivity at or below the limit, and within a delta of the supply, held continuously.
When to use it
Use CIP_CONDUCTIVITY_VER when a CIP final rinse is released on the returned rinse water rather than on the rinse timer, and both the return conductivity cell and the incoming rinse-water cell are available to the controller.
Interface
The published port signature. This is the whole of what the block exposes to your program — the implementation body is not shown here and ships with the download.
Inputs
| Port | Type | Unit |
|---|---|---|
| REQ | BOOL | — |
| COND | REAL | uS/cm |
| RETURN_COND | REAL | uS/cm |
| COND_OK | BOOL | — |
| RET_OK | BOOL | — |
| LIMIT | REAL | uS/cm |
| DELTA_MAX | REAL | uS/cm |
| COND_HYS | REAL | uS/cm |
| HOLD_T | TIME | — |
| TMO | TIME | — |
| ACK | BOOL | — |
Outputs
| Port | Type | Unit |
|---|---|---|
| VERIFIED | BOOL | — |
| IN_LIMIT | BOOL | — |
| DELTA | REAL | uS/cm |
| HOLD_ELAPSED_S | REAL | s |
| VALID | BOOL | — |
| FAILED | BOOL | — |
| FAIL | BOOL | — |
| ALM_SENSOR_FAULT | BOOL | — |
| ALM_CFG_ERR | BOOL | — |
Validation evidence
- Tests
- 9
- Simulated scans
- 155
- Simulator
- v0.1.0
Complete IEC 61131-3 implementation with a published test suite that runs on the vplant simulator. The counts above are that suite, executed on this build.
- Conforms to IEC 61131-3
Download CIP_CONDUCTIVITY_VER — free
Create a free Ri Tech account to download the block. You get the Structured Text body, the Rockwell Add-On Instruction (.L5X), the Schneider Control Expert DFB (.XDB), PLCopen XML and the datasheet.
Every block in the catalogue is free to download, in every format it ships, with no purchase and no card. Browsing needs no account at all; downloading needs a signed-in one, so the block lands in your library and re-downloads whenever you need it.
Source is never published on this page. The implementation is released to a signed-in Ri Tech account — free of charge, but never anonymously.