BE1_27_59_V

Basler-shaped under / over-voltage element (ANSI 27/59) with definite-time delay, reset hysteresis, dead-bus discrimination and VT-failure blocking.

Validated application blockPSUB·BaslerIEC 61131-3IEC 61499v1.0.0

When to use it

Use BE1_27_59_V when a bus, generator terminal or motor feeder needs under-voltage and over-voltage stages that ride through momentary sags and swells, and must not trip on a blown VT fuse or a bus that is simply de-energised.

Interface

The published port signature. This is the whole of what the block exposes to your program — the implementation body is not shown here and ships with the download.

Inputs

PortTypeUnit
ENABLEBOOL
VaREALpu
VbREALpu
VcREALpu
V27REALpu
V59REALpu
tDTIME
EN27BOOL
EN59BOOL
HYST_PCTREAL%
V_DEADREALpu
BKR_CLOSEDBOOL
VT_OKBOOL
BLKBOOL
ACKBOOL

Outputs

PortType
UVBOOL
OVBOOL
TRIPBOOL
TRIP27BOOL
TRIP59BOOL
BUS_DEADBOOL
DEAD_INHBOOL
BLOCKEDBOOL
ALM_VT_FAILBOOL
ALM_CFG_ERRBOOL

IEC 61499 event interface

EI INIT, REQ·EO INITO, CNF

Supervised control write

BE1_27_59_V commands a real actuator. It is written to sit underneath your own interlock, permissive and protection logic — not to replace it. Commission it as you would any control block you wrote yourself.

Validation evidence

Tests
8
Simulated scans
214
Simulator
v0.1.0

Complete IEC 61131-3 implementation with a published test suite that runs on the vplant simulator. The counts above are that suite, executed on this build.

  • Conforms to IEC 61131-3
  • Conforms to IEC 61499

Download BE1_27_59_V — free

Create a free Ri Tech account to download the block. You get the Structured Text body, the Rockwell Add-On Instruction (.L5X), the Schneider Control Expert DFB (.XDB), PLCopen XML, the IEC 61499 function block type (.fbt) and the datasheet.

Every block in the catalogue is free to download, in every format, with no purchase and no card. Browsing needs no account at all; downloading needs a signed-in one, so the block lands in your library and re-downloads whenever you need it.

Source is never published on this page. The implementation is released to a signed-in Ri Tech account — free of charge, but never anonymously.